DivX AntiFreeze Crack [32|64bit] [2022-Latest]

Sometimes DivX video clips contain invalid frames that cause Media Player to freeze the image. Theoretically codec should recover from the problem, but it doesn’t. So image is freezed permanently until clip position is manually changed (by moving position slider).
DivX AntiFreeze avoids such freezings. The DivX AntiFreeze application can be configurably used for DivX and MS MPEG4 (v1, v2, v3) clips.
Note: DivX AntiFreeze just avoids permanent freezings during playback, it does not fix the clip.

DivX AntiFreeze Crack + Incl Product Key [Win/Mac] (April-2022)

DivX AntiFreeze application protects DivX and MS MPEG4(v1,v2,v3) audio and video clips from
freezing up during playback, thus allowing their full length to be viewed. DivX and MS
MPEG4 codecs use an approximate frame interpolation and can have silent gaps in playback due to
invalid frame(s). However, certain DIVX and MS MPEG4 (v1, v2, v3) clips have a characteristic
pattern of invalid frames that cause the image to remain frozen during playback. DivX AntiFreeze
applies anti-freeze techniques to these clips and can prevent the clips from freezing up. By
allowing the clips to play, the anti-freeze is only temporary and DivX and MS MPEG4 (v1, v2, v3)
codecs will recover and the image will continue to play normally.
One thing to note is that clips that have been protected by DivX AntiFreeze will not play in
multi-pass DivX or MS MPEG4 (v1, v2, v3) decoders. Also, DivX AntiFreeze does not fix a clip
that has actually been damaged by an invalid frame.
In short, DivX AntiFreeze just provides temporary protection for the duration of the clip, and
allows the remainder of the clip to be played.
HOW TO USE DivX AntiFreeze:
DivX AntiFreeze can be configured to work with clips in both DivX and MS MPEG4 (v1, v2, v3)
(1) For DivX clips:
# The first thing to do is to launch DivX AntiFreeze on the computer where the DivX clip is
# The next thing to do is to set the quality level for your DivX clip to the lowest
(rawest) level. For example: DIVX_ASPECT_1_2
# Set the location of the clip in the DivX player. If the location is set to the default
(C:\), the clip will play normally.
# Then press the Play button on the player.
# If the DivX clip is not protected by DivX AntiFreeze, the player will freeze up after a
few seconds. If the DivX AntiFreeze application worked properly, the player will play

DivX AntiFreeze With Registration Code [2022]

1. DivX AntiFreeze is configurably used for DivX and MS MPEG4 (v1, v2, v3) clips.
2. Select the clip you would like to freeze from a playback queue.
3. Select the clip you would like to unfreeze from a playback queue.
4. Set the freeze/unfreeze key to CTRL (default), F5, PAGEUP or PAGEUP (when DivX AntiFreeze for MS MPEG4 v3 is used).
5. Play the clip and press the freeze/unfreeze key again to freeze/unfreeze clip.
Freezes the image for the selected clip and unfreezes the image for the selected clip.
When freeze or unfreeze key is pressed, it checks the clip index to make sure that the selected clip is in the currently playing video file.
Clips marked as frozen on the left will not be freezed on the right, and vice-versa.
Setting “key” to F5 or PageUp or PageUp to unfreeze, causes DivX to unfreeze the entire video and audio track of the selected clip.
When “key” is set to CTRL or PageDown or PageDown to freeze, DivX will freeze the entire video and audio track of the selected clip.Q:

Is there a hotkey to open the popup that says “downloading updates” to a file in a question or answer?

There is a great plugin for Firefox that allows you to see the download percentage of any website. It allows you to instantly know the status of your downloads, and open the browser’s download manager to the specific file.

Using this, I have been able to see the download percentage of any website, even a Javascript file that is running in the background.
Is there a hotkey in either browser or plugin that opens the popup, “downloading updates” that lets me know the download progress of any file in the browser?


There’s no such hotkey for it, but it does open a menu when you right click on the page.
Then you can choose to “Download to” and then “Download…” to the browser download manager.


For the sake of completeness: You can also open the context menu on a file by holding shift and right clicking.
See this question and its accepted answer for an example.

[Biology and

DivX AntiFreeze Crack For Windows

DivX AntiFreeze can be used as a convenient software replacement for the DivX Encoder service in the MS MPEG4 format and DivX Version 5 and later. The application performs the MPEG4, DivX v4, DivX v5.5.3, DivX v6.x and DivX v7.x encode processes automatically. You can also choose the bit rate for encoding as well as adjust the quality. AntiFreeze is extremely easy to use. Just add files to the directory and press the Start button. AntiFreeze will process and encode the video.
AntiFreeze has an ability to apply several optimizations to the video, which can enhance its quality. If you choose to apply optimization, you will need to specify the destination directory for the encoded files. AntiFreeze can be used in batch mode. The batch mode is useful if you wish to encode several files simultaneously. It can be used with DivX or with MS MPEG4 files.
The current version supports all DivX ( v4, v5, v5.5, v6.x and v7.x ) formats and all MS MPEG4 (v1, v2, v3) formats. Both DivX and MS MPEG4 formats are supported simultaneously.

Joel & Francis – Done already. You can download the next version from our website at

Geoff Godwin – I would be grateful if you could provide a link to the page that lists all the known bugs and problems with the anti-freeze and fixed that.

The following can be fixed by going to your divx.exe program shortcut on your desktop. On the menu click edit and add the following
“C:\Program Files\DivX AntiFreeze\bin\freq.cfg”

Then move it to the folder, where you have the divx.exe program (e.g C:\Program Files\DivX AntiFreeze\). You can then double-click on the program, to get the following screen

Click “Enable” and click “Apply” and “OK” and then you’re done!

Joel & Francis – Thanks, that worked. Unfortunately I have made the mistake of removing the manual script from my divx.exe and I’ve lost all my favourites. Does this script allow you to select from among the 200 or so files you have on your hard disk

What’s New In?

This is a thread about how to fix a corrupt DivX video file.

DivX video plays fine in Windows Media Player when it was downloaded or the media had been inserted.

The problem was detected in a DivX 5.3 video file, using one of the DivX plugins:

– DirectShowPlayer5,

– DirectShowPlayer4,

– DivX AutoPlay.

In the DivX video player all other DivX clips plays fine.

The problem was fixed by editing the DivX video file.

The problem was noticed when a video clip was played, the video froze, with no visible error. It only started playing when you moved the position slider of the video clip in the video player to a new position.

The problem happened to the following DivX video files:

1- DivX video files with UDF format, such as those created by Free H.264 software.

Note: If you have a DivX 5.3 video file, and no UDF file, then probably you downloaded an incorrect DivX file.

2- DivX video files created with one of the DivX plugins:

– DirectShowPlayer5,

– DirectShowPlayer4,

– DivX AutoPlay.

If DivX AutoPlay has been used to create the video file, then this file will probably have the UDF format.

[File Information]

File Name: (The file name of the original DivX 5.3 video file).

User: (The user that created the file).

Date Created: (The date and time that the file was created).

Version: (The version of the software used to create the file).

Size: (The size of the file in bytes).

Codec: (The DivX codec type used to encode the video file).

Channels: (The number of audio channels that were used to create the file).

Length: (The length of the video clip in seconds).

Duration: (The duration of the video clip in seconds).

Rating: (The rating of the video clip, from 1 to 5).

Decode: (The codec type used to decode the video file).

Decode Version: (The version of the decoder used to decode the video file).

Decode Parameters: (The parameters used when decoding the file).

Write bit rate: (The bit rate used when writing the video file).

Write sample rate: (The sample rate used when writing the video file).

Write frame rate: (The frame rate used when writing the video file).

Verify bit rate: (The bit rate used when verifying the video file).

Verify sample rate: (The sample rate used when verifying the video file).

System Requirements For DivX AntiFreeze:

Windows 7 / 8 / 8.1 / 10 / 10.1 / XP
2 GHz or faster processor
512 MB RAM
2 GB free disk space
25 MB free disk space required for installation
Additional Notes:
Microsoft ActiveSync will be used to receive the Outlook / Exchange calendar, contacts and tasks. If you do not have ActiveSync enabled on your email account, you will have to enable it from your web-client for the app to work.
If you are on Windows 7 or Windows 8


Leave a Reply

Your email address will not be published. Required fields are marked *